Author Topic: VT500C switch compatibility  (Read 14854 times)

2fast2young

  • Newbie
  • *
  • Posts: 15
VT500C switch compatibility
« on: March 13, 2014, 02:33:41 pm »
Quick question: Will VT500 C switches (specifically right side) fit onto the FT??

Thanks in Advance,

Elliot

Bucko

  • Full Member
  • ***
  • Posts: 106
Re: VT500C switch compatibility
« Reply #1 on: March 13, 2014, 05:33:59 pm »
I was asking the same question a few years ago.  I had wondered if it was possible to fit an older euro model 500C switch to the Ascot as the euro model had a light switch.  At least, the euro repair manual shows a light switch but I was never able to confirm if production models had a light switch or not.  In any case, I seem to recall the research I did suggested the right hand switch would not fit, or perhaps more accurately, it wasn't plug-n-play.  Doesn't mean you couldn't splice one in.

As I recall the Ascot's switch harness' plug into the junction box under the headlight.  Do the C models have the 'junction box?
« Last Edit: March 14, 2014, 03:33:39 pm by Bucko »

Buddy

  • Newbie
  • *
  • Posts: 21
Re: VT500C switch compatibility
« Reply #2 on: March 14, 2014, 12:13:36 am »
I haven't tried them, but, I'm pretty sure the 83 & 84 Shadow & Ascot switches will interchange. The Shadow's wires might be a little longer than on the Ascot's though.

I know the 85 & 86 Shadow switches have different plugs as mentioned.

I'm in the process of swapping the wiring harness, gauge cluster, and round headlight from an 85 Shadow to an 83 Ascot.

Also the 85 & 86 Shadows have an electronic tach and a single ignition box.

Buddy 
83 VT500ft Ascot (x3)
09 Yamaha Venture Royal(Miss Vivian)
If ya can't dazzle 'em with brilliance, baffle 'em with B. S.

J6G1Z

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1598
Re: VT500C switch compatibility
« Reply #3 on: March 18, 2014, 11:36:12 am »
I found a guy on another forum that is working on a Shadow. He sent me these two pictures of the Shadow's switch gear. I hope they answer your questions.

Good luck
J.

hondapartsman

  • Newbie
  • *
  • Posts: 17
    • Not a biker a motorcyclist
Re: VT500C switch compatibility
« Reply #4 on: March 23, 2014, 04:56:47 am »
The UK e model had a on off switch for the lights, at least the early one did. I got a second hand switch some time ago, thinking I'd have a go at making it work but it's not something I've even looked closely at yet and possibly never will. Time will tell.
On the road since 1977 ( with breaks for various health problems)
1998 XJ600N (soon to be sold.
1984 VT500FT
1981 CB250RSA (x2) One from new.
1979 CB250N (not currently rideable legally)
1972 CL175K6 (project)
http://notabikeramotorcyclist.weebly.com
If you want to do it, can do it. then do it!

Bucko

  • Full Member
  • ***
  • Posts: 106
Re: VT500C switch compatibility
« Reply #5 on: March 31, 2014, 05:44:22 pm »
The UK e model had a on off switch for the lights, at least the early one did. I got a second hand switch some time ago, thinking I'd have a go at making it work but it's not something I've even looked closely at yet and possibly never will. Time will tell.

You might get lucky and it's plug-n-play.  On my 900F and 1100F the euro switch (RHS with the light switch) plugs right in and works.  Being able to douse the lights has helped me to limp home a few times on a low battery.

2fast2young

  • Newbie
  • *
  • Posts: 15
Re: VT500C switch compatibility
« Reply #6 on: September 17, 2014, 01:36:54 pm »
I can confirm the Shadow switch will work. Running on my 83 with no trouble, it was a plug and play operation!

Elliot