Ascot Forum

First Generation Ascots => Tech Section => Topic started by: hultman on September 03, 2016, 05:25:23 pm

Title: Starter
Post by: hultman on September 03, 2016, 05:25:23 pm

 :'(
OK, I'm open to suggestions. 

Starter engages for about one turn and then disengages.  Had a very bad spindle bushing, so I replaced it.  Also was sticky and dirty in the small compartment, which I cleaned and lightly oiled.  No joy.

The little solenoid works and lifts the little engagement fingers.

What am I missing?

Jim

Title: Re: Starter
Post by: murdo on September 06, 2016, 03:38:35 am

Are all the teeth on the gears?