Ascot Forum
First Generation Ascots => Tech Section => Topic started by: montanaredneck77 on August 25, 2015, 09:24:53 pm
-
Can anyone tell me how to remove the rotor without the Honda rotor puller tool? I have the bolt out already but can figure out a way to pull the rotor off and cant afford to buy a tool that I would probably would rarely use.
-
Buy a metric bolt- M22x1.5 thread & run it in, but you will have to remove the right case cover and(like I did) use a penny to hold your gears from moving while you are cranking down on it.
-
It has to be longer than the bolt you removed, so it can push on the stud & pop the flywheel off
-
Thank you for the information. I will try it as soon as I find a place that sells bolts that big here.