Ascot Forum
Second Generation Ascots => Tech Section => Topic started by: Luke on September 26, 2014, 03:51:58 pm
-
Just a quick little tip ... Heat shrink tubing makes a nice replacement for the tired old plastic on the aluminum hose/wiring straps.
I used a 7/8" flat tubing ... perfect fit. It is only about half as thick as the original rubber, but I suppose you could double it up if you wanted.
Cheers All,
-
That does look much nicer!
Good tip.
Thanks
J.
-
Not sure if they're still available from Honda but they were the last time I checked (but this is a good option).