Ascot Forum
First Generation Ascots => The Thumper Years: Modified To Full Customs => Topic started by: triguyracer on July 18, 2018, 07:35:45 pm
-
Has anyone out there done this conversion on there FT and if you have which Trail Tech unit did you use ? Was it a pretty straight forward conversion ? . Where any parts that where a bit of a pain ? Looking to maybe do this conversion and clean up the speedo and tack area.
-
It has been done before: http://ascot500.com/index.php?topic=79.0
Straight forward installation. Most difficult part would be the actual mounting bracketry or dash fabrication. Be careful tightening the magnetic bolt that mounts on the brake disk. It is soft & will break easily.
J.