Ascot Forum
First Generation Ascots => The Thumper Years: Stock To Lightly Modified => Topic started by: karbo1 on July 19, 2014, 08:09:46 am
-
Anyone got a later model caliper swap they are using on the rear brake? Mine is junk and want to replace with something that isn't so hard to find. The 89-91 CBR 600 one is a bolt on affair they tell me.
-
I have an original FT Ascot rear brake caliper that I removed from a bike with about 29K miles on it. The bike was involved in a low speed dump & the caliper has a couple of gouges/scratches on the caliper housing. As far as I know, it still works. If you are interested send me a PM with your e-mail & shipping addresses. Then I can send you a couple of pictures of the part. As far as cost? I'm not looking to get rich, send me an offer & I'll probably take it.
J.
-
I went & dug up that FT rear caliper. It has the brake line with it & should still be wet with brake fluid on the inside. Here are a few pics. Please contact me by PM if you are interested.
Thank you
J.
PS. Even looks like it has good pads on it.
-
Sorry for the late response. I was on vacation and didn't look at the forum. Still interested in caliper. I pm'd you. Wonder if you have bracket too.
-
Hey Karbo1,
Are you sure that you sent me a PM? Or was it an e-mail?
I didn't receive your PM, but I did receive an e-mail from someone who is interested. Hopefully that is you, instead of two parties contacting me on the same day for the same part.
Thanks
J.