Ascot Forum
First Generation Ascots => Tech Section => Topic started by: mikeyboi83 on May 13, 2015, 02:19:27 am
-
Does anyone know how I could go about wiring my own custom start button? I can not seem to find it anywhere. I sort of want it down on the frame, I see it a lot on other bikes and I love it.
I am leaving the original button where it is so the headlight works like normal, just a button to start.
Thanks for any information.
-
Wouldn't I be able to just use heavy guage wire with a push button with a fuse and wire it directly to the solenoid? That way when I push the button its the same as jumping the solenoid?
-
The thing you see is most likely the key switch on the frame ..... i have yet to see a "push button start switch" on a frame. Haven't you taken apart the the controls on the bars ? ...
Might be a simple fix .... you should search the site more your not the only rider with that same problem.
-
Yep I took apart the controls and cleaned the contacts very good on the button, it has to be a ground somewhere lol Ugh
-
Try jumping across the 2 wires & see if it starts- if it does, follow the wires as far back as you can & splice new wire with your switch. Mount the switch where you like.
If jumping the wires together doesn't work, follow them back to see where your problem is.