Ascot Forum
First Generation Ascots => Tech Section => Topic started by: spanner67 on December 13, 2017, 08:10:29 am
-
hi ive got a kawasaki kl 250 frame with an xl 500 motor in which ive had for 4 years now and used a lot. i have now converted it with a ft 500 top half bolted onto my xl 500 bottom half so i will have benefit of kickstart and electric start. im almost there but need help with wiring the starter in, ignition/ lights are sorted. i ve kept wiring basic for lights /ignition. on/off for lights no indicators and a simple speedway ignition cut out. what i need is a simple drawing just showing how to wire in starter. starter solenoid/ starter control unit /starting starter solenoid relay and starter relay. nice and simple. any help would be much appreciated
[/quote]
-
FT 500 wiring diagram above.
J.
-
yes thanks. i have looked at it.what i need is a simple sketch showing how to wire in starter solenoid/ starter starting solenoid/ starter control unit/ starter/ starter push button/ battery. cheers
-
Study the wiring diagram.
Determine what is required to meet your goal.
Remove the remaining wiring.
Done!
J.
-
well i been messing around with wiring and ive got starter to work/engage without using starter control unit. im just using green/red wire from starter solenoid relay grounded to work everything. do i need control unit?