Ascot Forum
Second Generation Ascots => The V-Twin Years: Stock To Lightly Modified => Topic started by: 2fast2young on December 12, 2014, 05:43:53 pm
-
Hey guys, talking to a buddy about fabbing me up a custom Y-pipe for the VT, he thinks he has something lying around the shop that will work, does anyone know what the O.D. is for the stockers?
Thanks In Advance,
Elliot
-
Elliot,
I was not able to measure the O.D. where the muffler tubing mounts. I measured just to the side of that & came up with 1.5".
I think if you have a coupling that can close down to a bit past 1.5" you will be fine.
Here is what a P/O built for my VT Ascot.
Good luck
J.
-
Don't forget that MAC offers a complete dual exhaust system for a reasonable price.
J.
-
Hello,
The headers are 39mm outside Diameter , but where they go into the Exhaust manifold underneath the bike they are 44mm ( outside diameter of the gaskets ) I am working on fabbing my own exhaust at the moment as well. I picked up a Y - piece a week ago.. and need to have the ends that connect to the two headers widend to that size.
Post some pics of your progress...
cheers