First Generation Ascots > Tech Section

Starter remains enganged after start - custom wiring circuit - HELP please

<< < (2/3) > >>

scottly:
I've studied the wiring diagram a bit more, and the "starter control unit" is a safety device that only allows the starter to engage when the bike is in neutral, or the clutch is pulled in. The diode mounted in the stock handlebar  fuse holder serves to prevent the neutral indicator light from coming on when the clutch lever is pulled in.
Perhaps it would help if you posted a sketch of how you have the starter circuit wired?

Michael Back:
Hi Scottly.

Thanks for your reply - I appreciate your assistance in this matter.

I have attached a scetch of how I have wired the starter circuit.

All the best.

Michael Back.

scottly:
Move the wire that energizes the engagement solenoid from the big post on the main starter solenoid to the small wire that energizes the main starter solenoid.

Michael Back:
Brilliant idea ! Why havent I thought of that !?

Thanks a lot for your assistance - good to get some extra eyes on it ,0)

All the best.

Michael.

scottly:
Be sure to let us know how it works; I still don't know what the "starter solenoid relay" is supposed to do.

Navigation

[0] Message Index

[#] Next page

[*] Previous page