'Round The Campfire > The B.S. & Off Topic Board

"Dime City Cycles" Has Plenty Of Cool Parts...

<< < (2/2)

WTF304:
Honestly i like loud, people can hear you coming .... most problematic is the police can hear you too lol. I'm going to get a supertrapp no question about, I've had them on a few other machines and they work perfectly. Right now it's a toss up between two styles of universal, 328-1719 which i like that it has a track welded to it for the bracket even though i haven't seen what the track looks like. Downside is the end caps, don't want to look like a Kawasaki intruder lol but if all the parts can be interchanged then i might be inclined to buy one. The other is 425-17500 which i really like, looks good and it's external disc ....and decent end caps. Down side will be a bracket cause i don't want to lose the passenger pegs, my wife liked to go out for cruises, plus I've never experienced the internal disc type before.

J6G1Z:
The reverse megaphone muffler that I was talking about has a channel on the backside for a bolt & bracket also. Usually whatever muffler that you use, the muffler bracket attaches below the right side passenger peg & won't cause a problem for your passenger. (see picture below)

Whatever muffler you decide upon, make sure that mounting channel is on the back, or you will either have to weld or rivet a bracket on.

I'm a believer in "Loud Pipes Save Lives" but not real loud like most Harley bikes. Just loud enough so the pedestrians, bicyclists & other drivers can hear me when I rev it up. I don't like annoyingly loud pipes. They just make people not like motorcyclists.

J.

WTF304:
Right i agree, most people on the roadways don't see a bike and usually never hear them. I don't want it to be obnoxiously loud either and mostly no matter the case nobody likes motorcyclist ... just the way it is i guess. I'll check out that one you posted though I'd like to save the original mount as much as possible.

Thnx J

J6G1Z:
The picture above is showing the original muffler & passenger foot-peg mount. The passenger pegs were removed from this bike.

J.

WTF304:
Right what i ment was i want to keep the ability to have the actual peg still there as the bracket has a stop to keep the peg aligned

Navigation

[0] Message Index

[*] Previous page